Industrial Grade Epoxy Floors

Your Local Commercial Epoxy Flake Flooring Specialist

Here at Epoxy Flooring Co, we specialise in same-day epoxy flooring installations which enables you to drive on them the next day! All this is covered by our no fuss, Lifetime Warranty.

Same Day Commercial Epoxy Flooring Installations

When you have a big industrial epoxy flooring job...

It's time to call in the BIG BOYS!

When it comes to Commercial Epoxy Flooring, turn to the trusted local experts...

Commercial epoxy flooring is important for your business because it provides an important coating that you need to work and generate income. But it’s also annoying because very few companies can afford the time it takes to “down tools” and stop production so your flooring can be installed or repaired.

At Epoxy Flooring Co we get it and we know you want commercial epoxy flooring installed quickly. We know you want the job done well, on-time and to budget. We also know you only want to do it once.

That’s why we have a range of products that can meet any condition you can imagine, from food grade flooring for hospitals and restaurants to chemical resistant flooring for production plants.

When you want it done with speed, value and strength call us to discuss how we can help.

Here’s our best points:

We are the biggest installer of Industrial Same Day epoxy flooring in Australia
Our experience means we understand what’s required for your tough environment
We specialise in Same Day Installations
We work around YOUR tight installation deadlines
We pioneered the Industry-leading Lifetime Warranty
Attention to detail is critical to us
NOT acting like a typical ‘Tradie’ is a cornerstone of our approach.
If you need speed, value and strength that’s what we do

Same Day Installation

Lifetime Warranty

Get A Quote

Commercial Epoxy Flooring Services

Industrial Sheds

When you need epoxy flooring for your industrial shed you generally want it done quickly and to a budget. We get it and that’s why our range of Industrial Shed epoxy floor solutions are built around speed and value for money. We are Australia’s largest installer of Same Day Epoxy Flooring Systems.

Commercial Kitchens

We are Australia’s largest and oldest Same Day Epoxy Flooring Installers. We specialise in commercial kitchen epoxy flooring and epoxy flooring repairs. We’ve spent years working in the hospitality industry so we totally understand this stressful environment. Time is money in kitchens and you need them to be open and working. So we repair or install your new epoxy floor at a time that suits you and we get it done quickly.

Workshops

Workshop Epoxy Flooring provides a large number of options for your work space that vary depending on your budget, time available for installation and the strength you require. Picking the right option makes the difference between a sound investment that looks amazing in your workplace to a floor that won’t last very long and will look awful.

Production Plants

Epoxy flooring in production plants is complex due to the large number of factors to consider in choosing the correct coating. Rules and requirements from local councils, the National Construction Code, Manufacturer’s guidelines, Workplace Health & Safety and production timelines all have to be considered. We know you want your floor done with minimal interruption to your production schedule. We know you want it to be strong enough to handle your harsh environment and you want the work guaranteed

Bakeries

Flour, heavy machines, hot ovens, baking trays, foot traffic and pallet jacks all place a heavy load on your bakery epoxy floor. Then when you want a new floor installed the clock is ticking because you want to minimise down time. We are Australia’s Number 1 installer of industrial Same Day epoxy flooring so that means we know all about your concerns and requirements.

Cool Rooms

We have a range of epoxy flooring solutions for your cool room that will allow you to get back to work the next day. We pioneered Same Day Epoxy Flooring in Australia and have installed more square metres than any other firm in the Nation. So we know exactly you need to get the floor done on time, every time.

Commercial Epoxy Flooring Gallery

Epoxy Flooring Co Has You Covered!

Same Day Installation

Lifetime Warranty

Get A Quote

Australia's Number 1 Same Day Epoxy Installer

Square Meters Installed

0

Same Day Installations

0

Five Star Google Reviews

0

Commercial Epoxy Flooring FAQ

Not under normal conditions and use. It’s extremely hard wearing and will easily handle sedans, 4WD’s, SUV’s etc being driven on it.

Industrial Grade epoxies are capable of forklifts, pallet jacks and even planes being moved on it. We did a short video to show the results of a test we did with our work truck to see just how much we could attempt to crack or chip & damage an epoxy coating in 12 months.

This video answers the question “Will an epoxy floor crack or chip?”. Check out the incredible results here...

https://www.youtube.com/watch?v=aItp1nWsRuc
Not if applied correctly. However the best way to ensure that the coating doesn’t peel is to confirm that the installer will be grinding the floor before applying the epoxy. Acid washing (also called acid etching) is a method that does get promoted and it can work but it’s risky due to Acid Residue, seen in Image A.

Acid residue gets left behind after acid etching and can be difficult to remove. This is because once the floor is wet from you scrubbing and hosing the residue is difficult to see and remains that way even when dry. The consequences of not removing it though are disastrous. Image B shows a floor we were called to repair which started to peel just days after the owner installed it. The cause of the peeling was acid residue.

Personally when I just did my own garage recently I ran a grinder over it first. We did a small sample on a garage to show the difference between grinding and acid washing which you can see below. You can be the judge which you think is the best way to prepare your floor.
NO provided that the flooring is not exposed to UV light. But if a plain epoxy floor is exposed to sunlight it will yellow or amber like in Image A (below). Image B shows what the floor looked like when it was first applied. This is the section of the floor that did not get sunlight on it.

There are a number of solutions to prevent your epoxy from turning yellow.

Firstly, don’t expose it to sunlight. This is good in theory but in a garage, for example, a lot of the time when you open the door sunlight will creep in. So that leads to the second solution and that is to cover the epoxy with vinyl flakes because they will not turn yellow. This is called a full flake seamless epoxy floor (shown below).

These flakes are then covered with a 100% UV stable top coat. Polyaspartic, Polyurethane and Polyurea clear top coats are excellent options for UV stability. Polyaspartic coats are fast drying, have no harmful VOC’s and are extremely hard wearing and flexible so they are suitable for very tough conditions. Some polyaspartic top coats have Rapid Cure properties which means they can have traffic on them 4 hours after being applied.
If you use a 100% solids epoxy this is virtually odourless.

If you use a solvent-based epoxy it will smell until it is fully cured and this can be around 10-14 days.

100% solids means that evaporation doesn’t occur in order for the epoxy to cure. Think of honey. It is a 100% solid product IE it is just all 100% honey and if you spill it none of it will evaporate. It will just sit as a sticky mess for ages, or until your dog comes and licks it up. So it releases no gases from evaporation and therefore you don’t smell these gases being released.

100% solids epoxy are like honey and don’t evaporate and release smelly or harmful gases to get hard. The epoxy that is made from the chemicals being blended together are just like all different types of honey they all blend together in the bucket and react with each other to create a reaction that makes them all form one hard substance.

Smelly and potentially harmful types of epoxies are made with solvent bases. Think of ACETONE or nail polish remover. This is a solvent and these solvents evaporating from the epoxy are what you smell until they are fully cured. So if you don’t think it’s a good idea to sniff solvents, like sniffing nail polish remover for example, you need to check that the product you want to install isn’t solvent based.
Not normally and under ordinary day to day use it is basically bullet-proof. But if you try hard enough you can probably scratch it.

One of the commercial bakery jobs we did gave their floor a rigorous test. About 8 hours after we finished the bakers returned to work and dragged a 200kg machine across the floor.

Here’s a pic below of me trying to push the machine myself and I couldn’t shift it at all.

The next image shows the floor close up after they dragged the machine back into place.

You can barely see where they had scratched it and the owners were delighted with the floor’s strength.
No... but only if it has had a a form of Slip Resistance coating seeded into the top coat.

Common types of slip resistance grits are Aluminium Oxide and Silica and they look and feel like grains of sand.

These grains are pressed into the top coat and once the coat has cured the grains are a permanent part of the floor.

There are different sizes of grains so the slip resistance can be increased or decreased as required.

Check out some of our Happy Customer Reviews: